
| TECHNICAL DATA: | ||
| Operating range | UHF | |
| ISM band working frequency | 433.050 ÷ 434.790 MHz | |
| Working temperature | -25 ÷ +55 °C | |
| Storage and transport temperature | -25 ÷ +55 °C | |
| Range of action | 150 m | |
| * Safety functions (according to EN 13849-1): | ||
| - Stop Protection | PL d | |
| - Protection against unwanted movements from the rest position (UMFS) | PL c | |
| E1 Mia transmitter technical data | ||
| Antenna | incorporated | |
| Diet | 3.7V lithium polymer battery pack | |
| Absorption | < 45mA | |
| Power absorbed | < 0.15W | |
| RF emission power | < 10mW ERP | |
| 1st low battery warning (red LED lights up) | up to 1 hour of battery life | |
| 2nd low battery warning (fast flashing red LED) | up to 5 minutes of battery life | |
| 3rd low battery warning (horn sound) | 100 seconds autonomy | |
| Autonomy with charged battery at 20°C | about 20 hours | |
| Degree of protection | IP65 | |
| Dimensions | 72x35x65mm | |
| Weight | 390 g | |
| Technical data receiver E1 Flexi A - E1 Flexi SW | ||
| E1 Flexi A | E1 Flexi SW | |
| Antenna | incorporated | |
| Diet | 48/55/110/230 Vac; 50/60 Hz | 12-24Vdc |
| Power absorbed | < 15 VA | < 15W |
| Maximum contact capacity of the control circuits | 10 A | |
| Maximum contact capacity of the Stop circuit | 4 A | |
| Maximum contact capacity of the safety circuit | 4 A | |
| Maximum voltage applicable to contacts | 220 Vac; 50/60 Hz | 30Vdc |
| Degree of protection | IP65 | |
| Dimensions | 135x255x85 mm | |
| Weight | 1600 g | |