The HI991300 portable meter features a large LCD display that simultaneously displays pH, EC, or TDS and temperature readings. pH readings are displayed with a 0.01 resolution and an accuracy of +/-0.01 pH, while EC and TDS readings are displayed with a resolution of 0.01 mS/cm and 10 ppm (mg/L) and an accuracy of 2% full scale. The HI991300's EC range is 0 to 3999 µS/cm, and TDS ranges from 0 to 2000 ppm using a conversion factor of 0.45. The EC to TDS conversion factor is selectable between 0.45 and 1.0. A built-in temperature sensor allows for automatic temperature-compensated measurements. The HI991300 includes numerous features typically found in more expensive portable meters, including automatic calibration, buffer recognition, and temperature compensation. On-screen calibration and stability status indicators and guidance messages are provided. When the meter is turned on, the battery percentage is displayed on the display. The HI12883 amplified multiparameter probe measures pH, EC/TDS, and temperature in a single polypropylene housing. The electrode amplifier prevents interference from humidity and sources of electrical noise, including circulation pumps, motors, and lamp ballasts. The HI991300 is ideal for measuring pH, EC/TDS, and temperature in greenhouses, hydroponics, environmental monitoring, water treatment, boilers, and cooling towers.
Simple one-button calibration
pH calibration is automatic at one or two points with a set of stored standard solutions (4.01/7.01/10.01 or 4.01/6.86/9.18) or at one point for pH and EC with the Hanna quick calibration solution.
To perform a quick calibration, simply press and hold the left Power/Mode button for three seconds in measurement mode and release when QUICK CAL appears on the display. When the pH and Conductivity values are calibrated, "CAL OK" will be displayed and the instrument will exit measurement mode.
HI12883amplified pH electrode with built-in EC/TDS and temperature sensors and polypropylene body
The HI991300 comes with an amplified, polypropylene-bodied pH/EC/TDS/Temperature probe.
The amplifier will reduce the effects of electrical interference in high impedance pH measurement.
Examples of interference sources are motors, pumps and lamp ballasts.
Main features:
- 3 sensors in one probe;
- watertight;
- wide pH scale;
- selectable EC to TDS conversion factor;
- automatic temperature compensation;
- stability indicator;
- HOLD button;
- BEPS (battery error prevention system);
- % battery at startup;
- low battery indicator;
- automatic shutdown.